Free Quotation?

Polished Stone are committed
to providing you our best
quotation and servcie.

>> Click Here

Request a call back

Stain Removal

Order before 2pm for next day delivery. Orders placed before 2pm Friday will be delivered on Monday

Take Care of your worktops . . .

Once you have your new work surfaces, its important to look after them. Take a look at some of the specialist products we recommend.

Payments made easy with PayPal
Lithofin Resin-EX 1kg

Lithofin Resin-EX

This special remover is based on acidic reaction compounds supported by select, highly active organic solvents. In many cases Lithofin Resin-EX can be used instead of (dangerous and environmentally harmful) CFC-based cleaning products.

Technical Data:

Density: approx. 1.1 g/cm³
Flash Point: >90°C(c.C.)
pH-Value: approx. 3
Appearance: whitish, dimish, gel like
Odour: slightly pungent
Solubility in Water: emulsifiable

Properties

Lithofin Resin-EX penetrates into many organic substances and dirt deposits, dissolving them from the surface. The gel like consistence simplifies the application.

Field of Use

To remove epoxy grout materials and residues. Also highly suitable for removing organic substances such as resins, sealants, coatings, oil and grease deposits, paint (graffiti), lacquer, adhesives, plastic residues, etc. Suitable for indoor and outdoor use.
 
Surfaces: All quarry and ceramic tiles, rough natural stones such as granite, gneiss, quartzite as well as concrete and concrete stone.

Directions for Use

Test the product prior to use. Always apply to a dry surface. Protect surface from wetness during working time because water represses the effectiveness.
 
Application-/surface temperature: 10 - 30°C.
 
The mentioned working times are shorter at highertemperatures and longer at colder temperatures.

Directions to remove pavement fixing mortar

Generously apply to the dry surface using a brush or a scrubber. Allow to work for up to approx. 30 min. at room temp. of about 20°C. Then add water (best if diluted 1:10 with Lithofin MN Power-Clean) and brush. Afterwards, rinse and brush. Always brush diagonally to grouts. Rinse surface again with water. In case of any leftovers, repeat when surface is dry.

Coverage: up to approx. 5 m²/L, depending on dirt.

Directions to remove epoxy resin (2K) mortar

Generously apply to the dry surface using a brush or a roller. Allow to work for approx. 2 hrs at about 20°C. Then use a rough pad (ex. green pad for glazed tiles) to work through. Add water and continue to scrub. Remove excess fluid and rinse with water immediately.

Coverage: up to approx. 20 m²/L on glazed tiles.

1kg - £34.75 incl P&P each